Mts SWIFT 10 ATV Sensor Instrukcja Użytkownika Pobierz pdf (Strona 115)

SWIFT 10 ATV Sensors Maintenance

115

Cables

As required Inspect all electrical cables before and after every test. Always turn off the

electrical power before you disconnect, repair, or replace a cable.

1. Check the condition of the cables for cuts, exposed wires, or other types of

damage, loose connectors, and cracked or worn cable covers. Tighten any

loose connectors. Replace any cracked or worn cables.

2. Ensure that cable connectors are securely plugged into their respective

receptacles.

3. Ensure that all cables have appropriate strain relief devices installed.

4. Protect cables from being stepped on. In the test lab, elevate and cover all

cables to protect them from exposure to spilled hydraulic fluid.

5. Ensure that all cables are supported every 1.2 m (4 ft). Cables should also be

supported near a motion joint.

6. Check that path ways of moving cables are clear of obstructions. Prevent

cables from moving or rubbing against sharp corners.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 143 144

Brak uwag

Mts SWIFT 10 ATV Sensor Instrukcja Użytkownika Strona 115